Original Factory Hydraulic Unit System Power Pack - Monoblock Valves-GDV160 – Guorui

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

As for aggressive rates, we believe that you will be searching far and wide for anything that can beat us. We can easily state with absolute certainty that for such good quality at such charges we are the lowest around for 12 Volt Hydraulic Power Pack, Mining Machinery Gear Pump, 12v Dc Mini Power Unit, Special emphasis on the packaging of products to avoid any damage during transportation,Detailed attention to the valuable feedback and suggestions of our esteemed clients.
Original Factory Hydraulic Unit System Power Pack - Monoblock Valves-GDV160 – Guorui Detail:

Rated flow rate: 160L/min
Maximum flow rate: 170L/min
Maximum pressure at P port: 310bar
Maximum pressure at A/B port: 310bar
Maximum pressure at T port: 25bar
Internal leakage (at 70 bar):A/B toT : 30-35CC/min
Temperature range of the hydraulic oil:  
With NBR (BUNA-N) seals -20℃-80℃
With FPM (VITON) seals -20℃-100℃
Spool stroke (1/2 position): +7/-7 mm
With floating function (1/2 and F position): +7/-7 -9 mm
Recommend hydraulic oil viscosity range: 15-75mm²/s
Recommend temperature range: -40℃-60℃
Solenoid can be either 12 VDC or 24 VDC, corresponding current is 0-1.5 or 0-0.75 Amp.

Operating Principle
180
GDV160 series mono-block valve is an open centered 3 position 4 way valve. When spool is in its neutral position, the flow from pump passes through the neutral passage to tank., with very low drop. When on of the spool is moved to “1” or “2” position, the neutral passage is blocked. The flow from pump can only pass through load check valve to parallel passage, then, through spool opening to work port “A” or “B”.
180c
As shown in above picture, the first spool is in neutral position, flow from pump flows to parallel passage through the load check valve to supply flow to two spool. Because the second spool is pulled out 7mm, the second spool opening between parallel passage to A2 port allows flow to enter the A2 port. B2 port connected to return passage. Neutral passage is blocked by second spool.


Product detail pictures:

Original Factory Hydraulic Unit System Power Pack - Monoblock Valves-GDV160 – Guorui detail pictures


Related Product Guide:
Bosch Rexroth unveils variable-speed pressure and flow control system | Monoblock Control Valve On Tractor
New Cat D11 Dozer Drives Down Cost Per Ton | Yuken Hydraulic Valve

Our enterprise aims to operating faithfully, serving to all of our prospects , and working in new technology and new machine frequently for Original Factory Hydraulic Unit System Power Pack - Monoblock Valves-GDV160 – Guorui, The product will supply to all over the world, such as: Italy, Dubai, Georgia, Each customer's satisfactory is our goal. We are looking for long-term cooperation with each customer. To meet this, we keep up our quality and provide extraordinary customer service. Welcome to our company, we are expecting to cooperate with you.
  • This supplier stick to the principle of "Quality first, Honesty as base", it is absolutely to be trust.
    5 Stars By Victoria from Sierra Leone - 2016.08.21 14:13
    We have been engaged in this industry for many years, we appreciate the work attitude and production capacity of the company, this is a reputable and professional manufacturer.
    5 Stars By Catherine from Sweden - 2016.09.26 12:12

    Related Products