Newly Arrival Mobile Hydraulic Power Pack - Power Unit of Semi Electric Stacker for Pallet Material Handling in Warehousing Industry – Guorui
Newly Arrival Mobile Hydraulic Power Pack - Power Unit of Semi Electric Stacker for Pallet Material Handling in Warehousing Industry – Guorui Detail:
This power unit is specially designed for semi-electric stacker,It’s made up of high pressure gear pump, AC motor, multi- manifold, hydraulic valve, oil tank, etc.The manual unloading valve is equipped withmanual micro switch,The lifting and falling of the stacker arecontrolled by the handle of the unloading valve, and thefalling speed is automatically controlled by the built-inpressure compensating throttle valve.
1.Hydraulic system pressure: 200bar
2.Hydraulic oil tank volume: 6-10L
3.Displacement of Hydraulic pump: 1.6, 2.1, 2.6cc/r
4.Motor power: 1.6KW, AC220V
5.Motor rotary speed: 2500r/min
6.Function: Single acting way
7.Color: default red/ white plastic
8.Mounting: Horizontal
9.Material of tank: iron sheet(1-1.5mm), Engineering Plastic
10.Application: Stacker and forklift
|
Model |
Motor |
Disp.(cc/r) |
Tank Cap.(L) |
Pressure(Mpa) |
Installation |
Port Size |
L(mm) |
| DC-F6-1.6/F-1.6/12/**-5HS-D |
12V 1.6Kw 2500RPM |
1.6 | 5 |
20 |
Horizontal |
G3/8 |
270 |
| DC-F6-2.1/F-1.6/12/**-6HS-D | 2.1 | 6 | 300 | ||||
| DC-F6-2.1/F-2.2/24/**-6HS-D |
24V 2.2Kw 2500RPM |
2.1 | 6 | 300 | |||
| DC-F6-2.6/F-2.2/24/**-8HS-D | 2.6 | 8 | 370 |
Drawing
Special Notes
1、For different flow rate pump, pressure and motor power,please check the ordering guidance.
2、This motor is based on gap working system s2=2 ~ 4min(continuous working time), so it cannot run continuously.
3、Before installation, the cylinder, oil pipe, joint and other hydraulic components must be cleaned and free from any impurities.
4、The viscosity of hydraulic oil should be 15-68cst and should be clean andfree of impurities.HM46 hydraulic oil is recommended.
5、This hydraulic power pack is suitable for horizontal installation.
6、Check that whether there is enough oil in the oil tank immediately after the first operating of the system.
7、The hydraulic oil should be replaced after the first 100 hours’use of thesystem, and change the oil every 3,000 hours after that.
Application Area
Product detail pictures:
Related Product Guide:
Caterpillar Introduces 5-Seat Utility Vehicles | Komatsu Hydraulic Gear Pump
Global Hydrostatic Transmission Market : Growth Opportunities, Market Status grow at CAGR of 4.15% in 2023 | Yuken Hydraulic Valve
Attaining consumer satisfaction is our company's purpose without end. We will make wonderful endeavours to produce new and top-quality merchandise, satisfy your exclusive requirements and supply you with pre-sale, on-sale and after-sale services for Newly Arrival Mobile Hydraulic Power Pack - Power Unit of Semi Electric Stacker for Pallet Material Handling in Warehousing Industry – Guorui, The product will supply to all over the world, such as: Florence, Costa rica, Albania, The quality of our products is equal to OEM's quality, because our core parts are the same with OEM supplier. The above products have passed professional certification, and we not only can produce OEM-standard products but we also accept Customized Products order.
By Charlotte from Kenya - 2016.04.18 16:45
The factory technical staff not only have high level of technology, their English level is also very good, this is a great help to technology communication.
By Raymond from Moscow - 2015.06.05 13:10
