Factory source Hydraulic Power Unit 350 Bar - Power Unit of Semi Electric Stacker for Pallet Material Handling in Warehousing Industry – Guorui
Factory source Hydraulic Power Unit 350 Bar - Power Unit of Semi Electric Stacker for Pallet Material Handling in Warehousing Industry – Guorui Detail:
This power unit is specially designed for semi-electric stacker,It’s made up of high pressure gear pump, AC motor, multi- manifold, hydraulic valve, oil tank, etc.The manual unloading valve is equipped withmanual micro switch,The lifting and falling of the stacker arecontrolled by the handle of the unloading valve, and thefalling speed is automatically controlled by the built-inpressure compensating throttle valve.
1.Hydraulic system pressure: 200bar
2.Hydraulic oil tank volume: 6-10L
3.Displacement of Hydraulic pump: 1.6, 2.1, 2.6cc/r
4.Motor power: 1.6KW, AC220V
5.Motor rotary speed: 2500r/min
6.Function: Single acting way
7.Color: default red/ white plastic
8.Mounting: Horizontal
9.Material of tank: iron sheet(1-1.5mm), Engineering Plastic
10.Application: Stacker and forklift
Model |
Motor |
Disp.(cc/r) |
Tank Cap.(L) |
Pressure(Mpa) |
Installation |
Port Size |
L(mm) |
DC-F6-1.6/F-1.6/12/**-5HS-D |
12V 1.6Kw 2500RPM |
1.6 | 5 |
20 |
Horizontal |
G3/8 |
270 |
DC-F6-2.1/F-1.6/12/**-6HS-D | 2.1 | 6 | 300 | ||||
DC-F6-2.1/F-2.2/24/**-6HS-D |
24V 2.2Kw 2500RPM |
2.1 | 6 | 300 | |||
DC-F6-2.6/F-2.2/24/**-8HS-D | 2.6 | 8 | 370 |
Drawing
Special Notes
1、For different flow rate pump, pressure and motor power,please check the ordering guidance.
2、This motor is based on gap working system s2=2 ~ 4min(continuous working time), so it cannot run continuously.
3、Before installation, the cylinder, oil pipe, joint and other hydraulic components must be cleaned and free from any impurities.
4、The viscosity of hydraulic oil should be 15-68cst and should be clean andfree of impurities.HM46 hydraulic oil is recommended.
5、This hydraulic power pack is suitable for horizontal installation.
6、Check that whether there is enough oil in the oil tank immediately after the first operating of the system.
7、The hydraulic oil should be replaced after the first 100 hours’use of thesystem, and change the oil every 3,000 hours after that.
Application Area
Product detail pictures:
Related Product Guide:
GDOT’s $51M Widening of SR 92 Makes Progress | Komatsu Hydraulic Gear Pump
Special Report: CFD techniques determine gas-lift valve behavior | Komatsu Hydraulic Gear Pump
Our advantages are reduced prices,dynamic product sales workforce,specialized QC,solid factories,superior quality services for Factory source Hydraulic Power Unit 350 Bar - Power Unit of Semi Electric Stacker for Pallet Material Handling in Warehousing Industry – Guorui, The product will supply to all over the world, such as: Japan, US, Ghana, we rely on own advantages to build a mutual-benefit commerce mechanism with our cooperative partners. As a result, now we have gained a global sales network reaching the Middle East, Turkey, Malaysia and Vietnamese.
By Lydia from Comoros - 2015.12.25 12:43
We feel easy to cooperate with this company, the supplier is very responsible, thanks.There will be more in-depth cooperation.
By Grace from Argentina - 2016.01.28 18:53