Factory source 3 Spools Monoblock Control Valve - Monoblock Valves-GDV80 series – Guorui
Factory source 3 Spools Monoblock Control Valve - Monoblock Valves-GDV80 series – Guorui Detail:
|
Rated flow rate： |
80L/min |
|
|
Maximum flow rate： |
100L/min |
|
|
Maximum pressure at P port： |
310bar |
|
|
Maximum pressure at A/B port： |
310bar |
|
|
Maximum pressure at T port： |
25bar |
|
|
Internal leakage (at 70 bar):A/B toT ： |
30-35CC/min |
|
|
Temperature range of the hydraulic oil： |
|
|
|
With NBR (BUNA-N) seals |
-20℃-80℃ |
|
|
With FPM (VITON) seals |
-20℃-100℃ |
|
|
Spool stroke (1/2 position)： |
+7/-7 mm |
|
|
With floating function (1/2 and F position)： |
+7/-7 -9 mm |
|
|
Recommend hydraulic oil viscosity range： |
15-75mm²/s |
|
|
Recommend temperature range： |
-40℃-60℃ |
|
|
Solenoid can be either 12 VDC or 24 VDC, corresponding current is 0-1.5 or 0-0.75 Amp. |
||
Operating Principle
GDV80 series mono-block valve is an open centered, 3 position 4 way valve. When spool is in its neutral position, the flow from pump passes through the neutral passage to tank, with very low pressure drop. When one of the spool is moved to “1” or “2” position, the neutral passage is blocked. The flow from pump can only pass through load check to parallel passage, then, through the spool opening to work port “A” or “B”.
For multi-spool mono-block valve, if one of the spools is in “1” or “2” position,then, there is no flow in its down stream spool’s neutral passage. The main throttle occurs on the valve opening between bridge passage and spool. The operator can control more than one spools, but the magnitude of the flow rate for each controlled spool is dependent on the load.
Product detail pictures:
Related Product Guide:
Burn Brite’s next generation industrial LED lighting systems for harsh environments | Monoblock Control Valve On Tractor
Municipalities should not approve building plans which may devalue surrounding properties, ConCourt rules | Komatsu Hydraulic Gear Pump
Being supported by an highly developed and skilled IT group, we could offer you technical support on pre-sales & after-sales support for Factory source 3 Spools Monoblock Control Valve - Monoblock Valves-GDV80 series – Guorui, The product will supply to all over the world, such as: Jeddah, Rotterdam, Morocco, Besides there are also experienced production and management , advanced production equipment to assure our quality and delivery time , our company pursues the principle of good faith, high-quality and high-efficiency. We guarantee that our company will try our best to reduce customer purchase cost, shorten the period of purchase, stable solutions quality, increase customers' satisfaction and achieve win-win situation .
By Ina from Auckland - 2016.08.18 18:38
The sales person is professional and responsible, warm and polite, we had a pleasant conversation and no language barriers on communication.
By Beryl from Colombia - 2016.03.28 16:34
