Power Unit for Vehicle Lift
This hydraulic power unit is made up of high pressure gear pump, AC motor, multi-manifold hydraulic valve, oil tank, etc. It enable the two post vehicle lift have the function of lift and fall. The throat valve can control fall speed.
1.Hydraulic system pressure: 130-180bar
2.Hydraulic oil tank volume:6-12L
3.Displacement of Hydraulic pump: 2.1cc/r
4.Motor power: 2.2KW, AC220V
5.Motor rotary speed: 2850r/min
6.Function: Single acting way
7.Color: default red/ plastic white
8.Mounting: Horizonal / Vertical
9.Material of tank: iron sheet(1-1.5mm), Engineering Plastic
10.Application: vehicle, truck, small cranes
|
Model |
Motor |
Disp.(cc/r) |
Tank Cap.(L) |
Pressure(Mpa) |
Installation |
Port Size |
L(mm) |
| AC-F5-2.1/F-2.2/220/2850/**-10V-D |
220V 2.2Kw 2850RPM 50Hz |
2.1 | 10 | 20 |
Vertical |
G3/8 |
440 |
| AC-F5-2.7/F-2.2/220/2850/**-12V-D | 2.7 | 12 | 18 | 545 | |||
| AC-F5-2.1/F-2.2/380/2850/**-10V-D |
380V 2.2Kw 2850RPM 50Hz |
2.1 | 10 | 20 | 440 | ||
| AC-F5-2.7/F-2.2/380/2850/**-12V-D | 2.7 | 12 | 18 | 545 |
Drawing
Application Area
