OEM manufacturer Hydraulic Mini Gear Pumps - Monoblock Valves-GDV80 series – Guorui
OEM manufacturer Hydraulic Mini Gear Pumps - Monoblock Valves-GDV80 series – Guorui Detail:
Rated flow rate: |
80L/min |
|
Maximum flow rate: |
100L/min |
|
Maximum pressure at P port: |
310bar |
|
Maximum pressure at A/B port: |
310bar |
|
Maximum pressure at T port: |
25bar |
|
Internal leakage (at 70 bar):A/B toT : |
30-35CC/min |
|
Temperature range of the hydraulic oil: |
|
|
With NBR (BUNA-N) seals |
-20℃-80℃ |
|
With FPM (VITON) seals |
-20℃-100℃ |
|
Spool stroke (1/2 position): |
+7/-7 mm |
|
With floating function (1/2 and F position): |
+7/-7 -9 mm |
|
Recommend hydraulic oil viscosity range: |
15-75mm²/s |
|
Recommend temperature range: |
-40℃-60℃ |
|
Solenoid can be either 12 VDC or 24 VDC, corresponding current is 0-1.5 or 0-0.75 Amp. |
Operating Principle
GDV80 series mono-block valve is an open centered, 3 position 4 way valve. When spool is in its neutral position, the flow from pump passes through the neutral passage to tank, with very low pressure drop. When one of the spool is moved to “1” or “2” position, the neutral passage is blocked. The flow from pump can only pass through load check to parallel passage, then, through the spool opening to work port “A” or “B”.
For multi-spool mono-block valve, if one of the spools is in “1” or “2” position,then, there is no flow in its down stream spool’s neutral passage. The main throttle occurs on the valve opening between bridge passage and spool. The operator can control more than one spools, but the magnitude of the flow rate for each controlled spool is dependent on the load.
Product detail pictures:
Related Product Guide:
This Electric 1968 Ford Mustang Kicks Out a Shocking 800 HP! | Sectional Hydraulic Control Valve
Reviewing Servotronics Inc. (SVT)’s and The LGL Group Inc. (NYSEAMERICAN:LGL)’s results | Komatsu Hydraulic Gear Pump
To be able to give you benefit and enlarge our business, we also have inspectors in QC Team and assure you our greatest service and products for OEM manufacturer Hydraulic Mini Gear Pumps - Monoblock Valves-GDV80 series – Guorui, The product will supply to all over the world, such as: Pakistan, Florida, San Francisco, Based on experienced engineers, all orders for drawing-based or sample-based processing are welcomed. We have won a good reputation for outstanding customer service among our overseas customers. We will continue to try the best to offer you good quality products and the best service. We are looking forward to serving you.
By Prudence from Comoros - 2016.12.19 11:10
The product classification is very detailed that can be very accurate to meet our demand, a professional wholesaler.
By Joanna from Angola - 2015.10.09 19:07