OEM China Hydraulic Valve Block - Monoblock Valves-GDV80 series – Guorui
OEM China Hydraulic Valve Block - Monoblock Valves-GDV80 series – Guorui Detail:
Rated flow rate: |
80L/min |
|
Maximum flow rate: |
100L/min |
|
Maximum pressure at P port: |
310bar |
|
Maximum pressure at A/B port: |
310bar |
|
Maximum pressure at T port: |
25bar |
|
Internal leakage (at 70 bar):A/B toT : |
30-35CC/min |
|
Temperature range of the hydraulic oil: |
|
|
With NBR (BUNA-N) seals |
-20℃-80℃ |
|
With FPM (VITON) seals |
-20℃-100℃ |
|
Spool stroke (1/2 position): |
+7/-7 mm |
|
With floating function (1/2 and F position): |
+7/-7 -9 mm |
|
Recommend hydraulic oil viscosity range: |
15-75mm²/s |
|
Recommend temperature range: |
-40℃-60℃ |
|
Solenoid can be either 12 VDC or 24 VDC, corresponding current is 0-1.5 or 0-0.75 Amp. |
Operating Principle
GDV80 series mono-block valve is an open centered, 3 position 4 way valve. When spool is in its neutral position, the flow from pump passes through the neutral passage to tank, with very low pressure drop. When one of the spool is moved to “1” or “2” position, the neutral passage is blocked. The flow from pump can only pass through load check to parallel passage, then, through the spool opening to work port “A” or “B”.
For multi-spool mono-block valve, if one of the spools is in “1” or “2” position,then, there is no flow in its down stream spool’s neutral passage. The main throttle occurs on the valve opening between bridge passage and spool. The operator can control more than one spools, but the magnitude of the flow rate for each controlled spool is dependent on the load.
Product detail pictures:
Related Product Guide:
Officially Official: 2008 Lexus GS 460 and 450h | Komatsu Hydraulic Gear Pump
Bison Active Frame, new forwarder from Ponsse | Yuken Hydraulic Valve
We rely upon strategic thinking, constant modernisation in all segments, technological advances and of course upon our employees that directly participate in our success for OEM China Hydraulic Valve Block - Monoblock Valves-GDV80 series – Guorui, The product will supply to all over the world, such as: South Africa, Jordan, Kazakhstan, We have a good reputation for stable quality products, well received by customers at home and abroad. Our company would be guided by the idea of "Standing in Domestic Markets, Walking into International Markets". We sincerely hope that we could do business with customers both at home and abroad. We expect sincere cooperation and common development!
By Cornelia from Mozambique - 2016.01.28 19:59
A nice supplier in this industry, after a detail and careful discussion, we reached a consensus agreement. Hope that we cooperate smoothly.
By Isabel from Grenada - 2016.06.22 12:49