Guorui hydraulic (GRH) has launched a micro power unit for medical use. This hydraulic power unit is specially designed for medical transfer sickbed, with compact structure. It highly integrates the actuator (oil cylinder) and control valve, oil pump, motor and oil tank, with small volume and noise, light weight and convenient installation. It is suitable for the lifting of medical sickbed.
The detailed technical parameters are as follows:
Motor parameters: DC24V, 0.5KW.
Flow: 0.5-1 L / min
Oil tank volume: 1L
System pressure: 150 bar
Ambient temperature: - 40 ℃ ~ 80 ℃
Model And Specification |
||||||
Model |
Motor |
Displacement (CC/R) |
Oil tank (L) |
Pressure (MPA) |
Installation |
Oil Port |
DC-F10-0.25/D-0.5/24/**-1H-C |
24V 0.5KW 2000RPM |
0.25 |
1.0 |
15 |
horizontal |
G1/4 |
DC-F10-0.5/D-0.5/24/**-1H-C |
0.5 |
15 |
Notes:
1: This power unit adopts S3 working system, which cannot operate continuously but can work repeatedly.
2: Before installation, ensure that the hydraulic components such as oil cylinder, oil pipe and joint are clean and free of any impurities.
3: The viscosity of hydraulic oil shall be 15-68 CST, which shall be clean and free of impurities. N46 hydraulic oil is recommended; If all-weather operation is required, aviation hydraulic oil must be used.
4: After starting the operating system for the first time, immediately check whether the oil in the oil tank is sufficient.
5: The hydraulic oil shall be changed after the first 100 hours of system use, and then every 3000 hours.
Post time: Apr-19-2022