Manufactur standard Directional Hydraulic Control Valve - Monoblock Valves-GDV80 series – Guorui
Manufactur standard Directional Hydraulic Control Valve - Monoblock Valves-GDV80 series – Guorui Detail:
Rated flow rate: |
80L/min |
|
Maximum flow rate: |
100L/min |
|
Maximum pressure at P port: |
310bar |
|
Maximum pressure at A/B port: |
310bar |
|
Maximum pressure at T port: |
25bar |
|
Internal leakage (at 70 bar):A/B toT : |
30-35CC/min |
|
Temperature range of the hydraulic oil: |
|
|
With NBR (BUNA-N) seals |
-20℃-80℃ |
|
With FPM (VITON) seals |
-20℃-100℃ |
|
Spool stroke (1/2 position): |
+7/-7 mm |
|
With floating function (1/2 and F position): |
+7/-7 -9 mm |
|
Recommend hydraulic oil viscosity range: |
15-75mm²/s |
|
Recommend temperature range: |
-40℃-60℃ |
|
Solenoid can be either 12 VDC or 24 VDC, corresponding current is 0-1.5 or 0-0.75 Amp. |
Operating Principle
GDV80 series mono-block valve is an open centered, 3 position 4 way valve. When spool is in its neutral position, the flow from pump passes through the neutral passage to tank, with very low pressure drop. When one of the spool is moved to “1” or “2” position, the neutral passage is blocked. The flow from pump can only pass through load check to parallel passage, then, through the spool opening to work port “A” or “B”.
For multi-spool mono-block valve, if one of the spools is in “1” or “2” position,then, there is no flow in its down stream spool’s neutral passage. The main throttle occurs on the valve opening between bridge passage and spool. The operator can control more than one spools, but the magnitude of the flow rate for each controlled spool is dependent on the load.
Product detail pictures:
Related Product Guide:
Hybrids and Other Powertrain Advances in Earthmoving Equipment Generate ROI Even with Lower Fuel Prices | Monoblock Control Valve On Tractor
From speakers to sandwiches, feast your eyes on the ultimate luxury Christmas gifts | Monoblock Control Valve On Tractor
Our target should be to consolidate and enhance the top quality and service of current goods, in the meantime frequently create new products to satisfy diverse customers' calls for for Manufactur standard Directional Hydraulic Control Valve - Monoblock Valves-GDV80 series – Guorui, The product will supply to all over the world, such as: London, Colombia, Uruguay, We believe with our consistently excellent service you can get the best performance and cost least goods from us for a long term . We commit to provide better services and create more value to all our customers. Hope we can create a better future together.
By Edwina from Maldives - 2015.09.21 11:01
We have worked with many companies, but this time is the best,detailed explanation, timely delivery and quality qualified, nice!
By Elma from Curacao - 2016.07.07 13:00