High Quality Hydraulic Power Pack - Monoblock Valves-GDV80 series – Guorui
High Quality Hydraulic Power Pack - Monoblock Valves-GDV80 series – Guorui Detail:
|
Rated flow rate： |
80L/min |
|
|
Maximum flow rate： |
100L/min |
|
|
Maximum pressure at P port： |
310bar |
|
|
Maximum pressure at A/B port： |
310bar |
|
|
Maximum pressure at T port： |
25bar |
|
|
Internal leakage (at 70 bar):A/B toT ： |
30-35CC/min |
|
|
Temperature range of the hydraulic oil： |
|
|
|
With NBR (BUNA-N) seals |
-20℃-80℃ |
|
|
With FPM (VITON) seals |
-20℃-100℃ |
|
|
Spool stroke (1/2 position)： |
+7/-7 mm |
|
|
With floating function (1/2 and F position)： |
+7/-7 -9 mm |
|
|
Recommend hydraulic oil viscosity range： |
15-75mm²/s |
|
|
Recommend temperature range： |
-40℃-60℃ |
|
|
Solenoid can be either 12 VDC or 24 VDC, corresponding current is 0-1.5 or 0-0.75 Amp. |
||
Operating Principle
GDV80 series mono-block valve is an open centered, 3 position 4 way valve. When spool is in its neutral position, the flow from pump passes through the neutral passage to tank, with very low pressure drop. When one of the spool is moved to “1” or “2” position, the neutral passage is blocked. The flow from pump can only pass through load check to parallel passage, then, through the spool opening to work port “A” or “B”.
For multi-spool mono-block valve, if one of the spools is in “1” or “2” position,then, there is no flow in its down stream spool’s neutral passage. The main throttle occurs on the valve opening between bridge passage and spool. The operator can control more than one spools, but the magnitude of the flow rate for each controlled spool is dependent on the load.
Product detail pictures:
Related Product Guide:
Supplier marks 10th anniversary of driverless trucks | Yuken Hydraulic Valve
How To Fix Water Hammer In Hydraulic Circuits | Komatsu Hydraulic Gear Pump
We are experienced manufacturer. Wining the majority of the crucial certifications of its market for High Quality Hydraulic Power Pack - Monoblock Valves-GDV80 series – Guorui, The product will supply to all over the world, such as: Nepal, Sri Lanka, Lisbon, We welcome you to visit our company and factory. It is also convenient to visit our website. Our sales team will offer you the best service. If you need more information, please feel free to contact us by E-mail or telephone. We are sincerely hope to establish a good long-term business relationship with you through this opportunity, based on equal, mutual benefit from now till the future.
By Phoenix from Turkey - 2015.12.22 12:52
Factory equipment is advanced in the industry and the product is fine workmanship, moreover the price is very cheap, value for money!
By Alice from Tajikistan - 2015.12.11 14:13
