Factory making Diesel Fuel Transfer Pump - Monoblock Valves-GDV25 series – Guorui

Short Description:

Product Detail

Product Tags

Feedback (2)

It is a good way to improve our products and service. Our mission is to develop creative products to customers with a good experience for Solenoid Valve 24v, Low Noise Transmission Pump, Ac Power Compact Hydraulic Power Unit, We always regard the technology and prospects as the uppermost. We always function hard to make terrific values for our prospects and give our customers far better products and solutions & solutions.

Factory making Diesel Fuel Transfer Pump - Monoblock Valves-GDV25 series – Guorui Detail:

Rated flow rate	25L/min
Maximum flow rate	30L/min
Maximum pressure at P port	250bar
Maximum pressure at A/B port	250bar
Maximum pressure at T port	25bar
Internal leakage (at 70 bar):A/B toT	30-35CC/min
Temperature range of the hydraulic oil
With NBR (BUNA-N) seals	-20℃-80℃
With FPM (VITON) seals	-20℃-100℃
Spool stroke (1/2 position)	+5.5/-5.5 mm
With floating function (1/2 and F position)	+5.5/-5.5 -8 mm
Recommend hydraulic oil viscosity range	15-75mm²/s
Recommend temperature range	-40℃-60℃

Order Code Example

GDV25	-3	-P1	/210	-T1	-D1	-O1	-FG1	KQ1	-DC/00
Model	3 spool	Inlet port on top	Inlet relief setting（210bar)	Return port on top	Power beyond	First spool	Spool function	Standard manually control

-O2	-FG2	-KQ5	-DC/24
Second spool	Spool function	Electrical controlled with detent	24VDC

-O3	-FG2	-KQ2	-DC/00
Third	Spool function	Hydraulic remote controlled	Not electrical

GDV25 series mono-block valve is an open center,3 position 4 way valve. Flow from pump passes through inlet port and enters to inlet passage.The inlet passage connects two passage:one is through the load check into the parallel passage to supply flow to metering spool;Another is to neutral passage .When spool is in neutral position,spool metering with parallel passage is blocked.The oil from pump has to pass through neutral passage.When all spools are in neutral position ,parallel passage for each spool is blocked,and neutral passage is wide open.Therefore,oil from pump is directly passing through the neutral passage to return passage to tank.It produces small pressure drop from “P” to “T”.When one of the spools is moved to “1” or “2” position,the spool blocked the neutral passage.The flow from pump has to pass load check to parallel passage,then through valve opening between parallel passage and spool to work port “A” or “B”. For multi-spool mono-block valve, when one of its spools is in “1” or “2” position,its downstream of the neutral passage has no flow. The operator can operate more than one spools at a time, but the speed of the controlled device will be dependent on the magnitude of the load.

Product detail pictures:

Our merchandise are commonly recognized and reliable by customers and can meet constantly developing economic and social desires for Factory making Diesel Fuel Transfer Pump - Monoblock Valves-GDV25 series – Guorui, The product will supply to all over the world, such as: Morocco, Russia, Kuwait, Due to the stability of our products, timely supply and our sincere service, we are able to sell our products not only over the domestic market, but also exported to countries and regions, including the Middle East, Asia, Europe and other countries and regions. At the same time, we also undertake OEM and ODM orders. We will do our best to serve your company, and establish a successful and friendly cooperation with you.

Bi-Directional Hydraulic Gear Motor

Gear Pump For Hydraulic Power Units

Gear Pump Used In Oil Fields

Hydraulic Pump

Mini Power Pack Unit

Multiple Directional Control Valve

The customer service staff is very patient and has a positive and progressive attitude to our interest, so that we can have a comprehensive understanding of the product and finally we reached an agreement, thanks!