Factory made hot-sale Excavator Gear Pump - Monoblock Valves-GDV80 series – Guorui

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We are also focusing on improving the stuff management and QC system so that we could keep great advantage in the fiercely-competitive business for 24v Hydraulic Power Unit, Power Unit Hydraulic, High Pressure Oil Pump, We're searching ahead to setting up long-term company associations with you. Your comments and solutions are remarkably appreciated.
Factory made hot-sale Excavator Gear Pump - Monoblock Valves-GDV80 series – Guorui Detail:

Rated flow rate:

80L/min

Maximum flow rate:

100L/min

Maximum pressure at P port:

310bar

Maximum pressure at A/B port:

310bar

Maximum pressure at T port:

25bar

Internal leakage (at 70 bar):A/B toT :

30-35CC/min

Temperature range of the hydraulic oil:

 

With NBR (BUNA-N) seals

-20℃-80℃

With FPM (VITON) seals

-20℃-100℃

Spool stroke (1/2 position):

+7/-7 mm

With floating function (1/2 and F position):

+7/-7 -9 mm

Recommend hydraulic oil viscosity range:

15-75mm²/s

Recommend temperature range:

-40℃-60℃

Solenoid can be either 12 VDC or 24 VDC, corresponding current is 0-1.5 or 0-0.75 Amp.

Operating Principle

r1
GDV80 series mono-block valve is an open centered, 3 position 4 way valve. When spool is in its neutral position, the flow from pump passes through the neutral passage to tank, with very low pressure drop. When one of the spool is moved to “1” or “2” position, the neutral passage is blocked. The flow from pump can only pass through load check to parallel passage, then, through the spool opening to work port “A” or “B”.

r3
For multi-spool mono-block valve, if one of the spools is in “1” or “2” position,then, there is no flow in its down stream spool’s neutral passage. The main throttle occurs on the valve opening between bridge passage and spool. The operator can control more than one spools, but the magnitude of the flow rate for each controlled spool is dependent on the load.
r2


Product detail pictures:

Factory made hot-sale Excavator Gear Pump -  Monoblock Valves-GDV80 series – Guorui detail pictures


Related Product Guide:
Myths and methods for protecting boilers against flue-gas condensation | 2017-08-14 | 12v Dc Hydraulic Power Pack With Hand Pump
This Electric 1968 Ford Mustang Kicks Out a Shocking 800 HP! | Sectional Hydraulic Control Valve

abide by the contract", conforms towards the market requirement, joins during the market competition by its good quality likewise as provides additional comprehensive and great services for customers to let them turn out to be big winner. The pursue of your enterprise, is the clients' fulfillment for Factory made hot-sale Excavator Gear Pump - Monoblock Valves-GDV80 series – Guorui, The product will supply to all over the world, such as: French, Belarus, Sheffield, We will initiate the second phase of our development strategy. Our company regards "reasonable prices, efficient production time and good after-sales service" as our tenet. If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.
  • This company can be well to meet our needs on product quantity and delivery time, so we always choose them when we have procurement requirements.
    5 Stars By Maggie from Rotterdam - 2016.10.13 10:47
    Wide range, good quality, reasonable prices and good service, advanced equipment, excellent talents and continuously strengthened technology forces,a nice business partner.
    5 Stars By Mona from French - 2015.09.23 17:37

    Related Products