2017 Latest Design Latch Valve Solenoid - Monoblock Valves-GDV80 series – Guorui
2017 Latest Design Latch Valve Solenoid - Monoblock Valves-GDV80 series – Guorui Detail:
Rated flow rate: |
80L/min |
|
Maximum flow rate: |
100L/min |
|
Maximum pressure at P port: |
310bar |
|
Maximum pressure at A/B port: |
310bar |
|
Maximum pressure at T port: |
25bar |
|
Internal leakage (at 70 bar):A/B toT : |
30-35CC/min |
|
Temperature range of the hydraulic oil: |
|
|
With NBR (BUNA-N) seals |
-20℃-80℃ |
|
With FPM (VITON) seals |
-20℃-100℃ |
|
Spool stroke (1/2 position): |
+7/-7 mm |
|
With floating function (1/2 and F position): |
+7/-7 -9 mm |
|
Recommend hydraulic oil viscosity range: |
15-75mm²/s |
|
Recommend temperature range: |
-40℃-60℃ |
|
Solenoid can be either 12 VDC or 24 VDC, corresponding current is 0-1.5 or 0-0.75 Amp. |
Operating Principle
GDV80 series mono-block valve is an open centered, 3 position 4 way valve. When spool is in its neutral position, the flow from pump passes through the neutral passage to tank, with very low pressure drop. When one of the spool is moved to “1” or “2” position, the neutral passage is blocked. The flow from pump can only pass through load check to parallel passage, then, through the spool opening to work port “A” or “B”.
For multi-spool mono-block valve, if one of the spools is in “1” or “2” position,then, there is no flow in its down stream spool’s neutral passage. The main throttle occurs on the valve opening between bridge passage and spool. The operator can control more than one spools, but the magnitude of the flow rate for each controlled spool is dependent on the load.
Product detail pictures:
Related Product Guide:
Municipalities should not approve building plans which may devalue surrounding properties, ConCourt rules | Sectional Hydraulic Control Valve
PULS 24V and 12V Dual Output DC UPS Devices from Control Logic | 12v Dc Hydraulic Power Pack With Hand Pump
We take "customer-friendly, quality-oriented, integrative, innovative" as objectives. "Truth and honesty" is our administration ideal for 2017 Latest Design Latch Valve Solenoid - Monoblock Valves-GDV80 series – Guorui, The product will supply to all over the world, such as: Istanbul, Rotterdam, Russia, All these products are manufactured in our factory located in China. So we can guarantee our quality seriously and availably. Within these four years we sell not only our products but also our service to clients throughout the world.
By Eden from Ethiopia - 2016.08.15 12:36
The accounts manager made a detailed introduction about the product, so that we have a comprehensive understanding of the product, and ultimately we decided to cooperate.
By Georgia from Bandung - 2015.10.31 10:02