2017 High quality Handheld Mini Hydraulic Motor Pump - Monoblock Valves-GDV80 series – Guorui
2017 High quality Handheld Mini Hydraulic Motor Pump - Monoblock Valves-GDV80 series – Guorui Detail:
Rated flow rate: |
80L/min |
|
Maximum flow rate: |
100L/min |
|
Maximum pressure at P port: |
310bar |
|
Maximum pressure at A/B port: |
310bar |
|
Maximum pressure at T port: |
25bar |
|
Internal leakage (at 70 bar):A/B toT : |
30-35CC/min |
|
Temperature range of the hydraulic oil: |
|
|
With NBR (BUNA-N) seals |
-20℃-80℃ |
|
With FPM (VITON) seals |
-20℃-100℃ |
|
Spool stroke (1/2 position): |
+7/-7 mm |
|
With floating function (1/2 and F position): |
+7/-7 -9 mm |
|
Recommend hydraulic oil viscosity range: |
15-75mm²/s |
|
Recommend temperature range: |
-40℃-60℃ |
|
Solenoid can be either 12 VDC or 24 VDC, corresponding current is 0-1.5 or 0-0.75 Amp. |
Operating Principle
GDV80 series mono-block valve is an open centered, 3 position 4 way valve. When spool is in its neutral position, the flow from pump passes through the neutral passage to tank, with very low pressure drop. When one of the spool is moved to “1” or “2” position, the neutral passage is blocked. The flow from pump can only pass through load check to parallel passage, then, through the spool opening to work port “A” or “B”.
For multi-spool mono-block valve, if one of the spools is in “1” or “2” position,then, there is no flow in its down stream spool’s neutral passage. The main throttle occurs on the valve opening between bridge passage and spool. The operator can control more than one spools, but the magnitude of the flow rate for each controlled spool is dependent on the load.
Product detail pictures:
Related Product Guide:
From an excavator to a surface drill | Komatsu Hydraulic Gear Pump
New designs enable subsea controls to go further and deeper | Komatsu Hydraulic Gear Pump
During the past few years, our business absorbed and digested state-of-the-art technologies the two at home and abroad. Meanwhile, our firm staffs a group of experts devoted to your development of 2017 High quality Handheld Mini Hydraulic Motor Pump - Monoblock Valves-GDV80 series – Guorui, The product will supply to all over the world, such as: Croatia, Hungary, Palestine, we rely on own advantages to build a mutual-benefit commerce mechanism with our cooperative partners. As a result, we've gained a global sales network reaching the Middle East, Turkey, Malaysia and Vietnamese.
By Elsa from Amsterdam - 2016.11.12 12:31
As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!
By Renata from Finland - 2016.11.20 15:58